Bicistronic lentiviral vector systems

Back

The Lenti-X Packaging Single Shots (VSV-G) protocol

Back

Consistent, high-efficiency transfections lead to high titers

Consistent, high-efficiency transfections lead to high titers. A lentiviral vector containing the ZsGreen1 gene was packaged according to the Lenti-X single shots protocol in four independent experiments. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots; the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. 48 hours after transfection, the cells were imaged by fluorescence microscopy (Panel A, top) and light microscopy (Panel A, bottom). After images were taken, the supernatant was harvested and used infect HT1080 cells for titer determination (Panel B, IFU/ml).

Back

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots. A CMV ZsGreen1 expression cassette was cloned into several lentiviral vector backbones. These vectors were then packaged into lentivirus using the Lenti-X packaging single shots following the provided protocol. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots, and the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. After 48 hours, titer was determined using several methods. To determine infectivity, the supernatant was harvested and used to infect HT1080 cells (Flow Cytometry). Harvested viral supernatants were also analyzed by RT-PCR to quantify viral genome copies (qRT-PCR, Lenti-X qRT-PCR Titration Kit), ELISA to measure p24 (p24 ELISA, Lenti-X p24 Rapid Titer Kit), and by a rapid lentiviral detection method (Lenti-X GoStix).

Back

A comparison of fourth- and third-generation lentiviral packaging systems

A comparison of fourth- and third-generation lentiviral packaging systems . Our Lenti-X Packaging single shots utilize a packaging system that consists of five separate components (Panel A), mixed in proprietary proportions for optimized packaging activity. The separation of the gag, pol, and env genes effectively reduces the incidence of RCL (Wu et al., 2000). High levels of expression of essential viral components are driven by the Tet-Off and Tat transactivators, which induce a cascade of expression that results in high titers of lentivirus. The pol gene is fused to vpr to ensure transport of the reverse transcriptase/integrase protein into the recombinant lentiviral particle. Not all vector elements are shown. Other 3rd generation lentiviral packaging systems (Panel B) generate lower titers, do not contain separate gag and pol sequences, and do not use a transactivation cascade mechanism.

Back

631275: Lenti-X Packaging Single Shots (VSV-G)

Back

632180: Lenti-X 293T Cell Line

Back

Clontech's lentiviral packaging system (Panel A) and a lentiviral packaging system from a leading competitor (Panel B) were each used to generate viral supernatants from their respective lentiviral system vectors that were engineered to express the ZsGreen1 fluorescent protein

Back

Transduction of neural progenitor cells by Lenti-X lentivirus

Transduction of neural progenitor cells by Lenti-X lentivirus. Recombinant lentivirus for expressing ZsGreen1 was produced using Lenti-X virus and used to transduce normal human neural progenitor cells. A single transduced cell is shown under phase contrast microscopy (Panel A) and fluorescence microscopy (Panel B).

Back

High-titer lentivirus production

High-titer lentivirus production. Lenti-X 293T cells were transduced with the indicated volumes (µl) of lentiviral packaging supernatant generated with the Lenti-X Expression System and then selected with puromycin for 9 days to allow the formation of the resistant colonies, which were then stained with crystal violet.

Back

293T cell line for higher titers

293T cell line for higher titers. We used our fourth-generation lentiviral packaging system and one of our pLVX-lentiviral vectors to compare the virus production of the Lenti-X 293T Cell Line to that of two other commonly used HEK 293-based cell lines. Lenti-X 293T cells clearly outperformed the other cell lines—producing over 6X more virus than 293FT cells and up to 30X more virus than the parental HEK 293 cell line.

Back

The Lenti-X Packaging Single Shots (VSV-G) protocol

Back

Consistent, high-efficiency transfections lead to high titers

Consistent, high-efficiency transfections lead to high titers. A lentiviral vector containing the ZsGreen1 gene was packaged according to the Lenti-X single shots protocol in four independent experiments. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots; the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. 48 hours after transfection, the cells were imaged by fluorescence microscopy (Panel A, top) and light microscopy (Panel A, bottom). After images were taken, the supernatant was harvested and used infect HT1080 cells for titer determination (Panel B, IFU/ml).

Back

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots. A CMV ZsGreen1 expression cassette was cloned into several lentiviral vector backbones. These vectors were then packaged into lentivirus using the Lenti-X packaging single shots following the provided protocol. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots, and the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. After 48 hours, titer was determined using several methods. To determine infectivity, the supernatant was harvested and used to infect HT1080 cells (Flow Cytometry). Harvested viral supernatants were also analyzed by RT-PCR to quantify viral genome copies (qRT-PCR, Lenti-X qRT-PCR Titration Kit), ELISA to measure p24 (p24 ELISA, Lenti-X p24 Rapid Titer Kit), and by a rapid lentiviral detection method (Lenti-X GoStix).

Back

A comparison of fourth- and third-generation lentiviral packaging systems

A comparison of fourth- and third-generation lentiviral packaging systems . Our Lenti-X Packaging single shots utilize a packaging system that consists of five separate components (Panel A), mixed in proprietary proportions for optimized packaging activity. The separation of the gag, pol, and env genes effectively reduces the incidence of RCL (Wu et al., 2000). High levels of expression of essential viral components are driven by the Tet-Off and Tat transactivators, which induce a cascade of expression that results in high titers of lentivirus. The pol gene is fused to vpr to ensure transport of the reverse transcriptase/integrase protein into the recombinant lentiviral particle. Not all vector elements are shown. Other 3rd generation lentiviral packaging systems (Panel B) generate lower titers, do not contain separate gag and pol sequences, and do not use a transactivation cascade mechanism.

Back

631275: Lenti-X Packaging Single Shots (VSV-G)

Back

632180: Lenti-X 293T Cell Line

Back

Clontech's lentiviral packaging system (Panel A) and a lentiviral packaging system from a leading competitor (Panel B) were each used to generate viral supernatants from their respective lentiviral system vectors that were engineered to express the ZsGreen1 fluorescent protein

Back

Transduction of neural progenitor cells by Lenti-X lentivirus

Transduction of neural progenitor cells by Lenti-X lentivirus. Recombinant lentivirus for expressing ZsGreen1 was produced using Lenti-X virus and used to transduce normal human neural progenitor cells. A single transduced cell is shown under phase contrast microscopy (Panel A) and fluorescence microscopy (Panel B).

Back

High-titer lentivirus production

High-titer lentivirus production. Lenti-X 293T cells were transduced with the indicated volumes (µl) of lentiviral packaging supernatant generated with the Lenti-X Expression System and then selected with puromycin for 9 days to allow the formation of the resistant colonies, which were then stained with crystal violet.

Back

293T cell line for higher titers

293T cell line for higher titers. We used our fourth-generation lentiviral packaging system and one of our pLVX-lentiviral vectors to compare the virus production of the Lenti-X 293T Cell Line to that of two other commonly used HEK 293-based cell lines. Lenti-X 293T cells clearly outperformed the other cell lines—producing over 6X more virus than 293FT cells and up to 30X more virus than the parental HEK 293 cell line.

Back

The Lenti-X Packaging Single Shots (VSV-G) protocol

Back

Consistent, high-efficiency transfections lead to high titers

Consistent, high-efficiency transfections lead to high titers. A lentiviral vector containing the ZsGreen1 gene was packaged according to the Lenti-X single shots protocol in four independent experiments. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots; the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. 48 hours after transfection, the cells were imaged by fluorescence microscopy (Panel A, top) and light microscopy (Panel A, bottom). After images were taken, the supernatant was harvested and used infect HT1080 cells for titer determination (Panel B, IFU/ml).

Back

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots. A CMV ZsGreen1 expression cassette was cloned into several lentiviral vector backbones. These vectors were then packaged into lentivirus using the Lenti-X packaging single shots following the provided protocol. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots, and the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. After 48 hours, titer was determined using several methods. To determine infectivity, the supernatant was harvested and used to infect HT1080 cells (Flow Cytometry). Harvested viral supernatants were also analyzed by RT-PCR to quantify viral genome copies (qRT-PCR, Lenti-X qRT-PCR Titration Kit), ELISA to measure p24 (p24 ELISA, Lenti-X p24 Rapid Titer Kit), and by a rapid lentiviral detection method (Lenti-X GoStix).

Back

A comparison of fourth- and third-generation lentiviral packaging systems

A comparison of fourth- and third-generation lentiviral packaging systems . Our Lenti-X Packaging single shots utilize a packaging system that consists of five separate components (Panel A), mixed in proprietary proportions for optimized packaging activity. The separation of the gag, pol, and env genes effectively reduces the incidence of RCL (Wu et al., 2000). High levels of expression of essential viral components are driven by the Tet-Off and Tat transactivators, which induce a cascade of expression that results in high titers of lentivirus. The pol gene is fused to vpr to ensure transport of the reverse transcriptase/integrase protein into the recombinant lentiviral particle. Not all vector elements are shown. Other 3rd generation lentiviral packaging systems (Panel B) generate lower titers, do not contain separate gag and pol sequences, and do not use a transactivation cascade mechanism.

Back

631275: Lenti-X Packaging Single Shots (VSV-G)

Back

632180: Lenti-X 293T Cell Line

Back

Clontech's lentiviral packaging system (Panel A) and a lentiviral packaging system from a leading competitor (Panel B) were each used to generate viral supernatants from their respective lentiviral system vectors that were engineered to express the ZsGreen1 fluorescent protein

Back

Transduction of neural progenitor cells by Lenti-X lentivirus

Transduction of neural progenitor cells by Lenti-X lentivirus. Recombinant lentivirus for expressing ZsGreen1 was produced using Lenti-X virus and used to transduce normal human neural progenitor cells. A single transduced cell is shown under phase contrast microscopy (Panel A) and fluorescence microscopy (Panel B).

Back

High-titer lentivirus production

High-titer lentivirus production. Lenti-X 293T cells were transduced with the indicated volumes (µl) of lentiviral packaging supernatant generated with the Lenti-X Expression System and then selected with puromycin for 9 days to allow the formation of the resistant colonies, which were then stained with crystal violet.

Back

293T cell line for higher titers

293T cell line for higher titers. We used our fourth-generation lentiviral packaging system and one of our pLVX-lentiviral vectors to compare the virus production of the Lenti-X 293T Cell Line to that of two other commonly used HEK 293-based cell lines. Lenti-X 293T cells clearly outperformed the other cell lines—producing over 6X more virus than 293FT cells and up to 30X more virus than the parental HEK 293 cell line.

Back

The Lenti-X Packaging Single Shots (VSV-G) protocol

Back

Consistent, high-efficiency transfections lead to high titers

Consistent, high-efficiency transfections lead to high titers. A lentiviral vector containing the ZsGreen1 gene was packaged according to the Lenti-X single shots protocol in four independent experiments. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots; the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. 48 hours after transfection, the cells were imaged by fluorescence microscopy (Panel A, top) and light microscopy (Panel A, bottom). After images were taken, the supernatant was harvested and used infect HT1080 cells for titer determination (Panel B, IFU/ml).

Back

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots. A CMV ZsGreen1 expression cassette was cloned into several lentiviral vector backbones. These vectors were then packaged into lentivirus using the Lenti-X packaging single shots following the provided protocol. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots, and the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. After 48 hours, titer was determined using several methods. To determine infectivity, the supernatant was harvested and used to infect HT1080 cells (Flow Cytometry). Harvested viral supernatants were also analyzed by RT-PCR to quantify viral genome copies (qRT-PCR, Lenti-X qRT-PCR Titration Kit), ELISA to measure p24 (p24 ELISA, Lenti-X p24 Rapid Titer Kit), and by a rapid lentiviral detection method (Lenti-X GoStix).

Back

A comparison of fourth- and third-generation lentiviral packaging systems

A comparison of fourth- and third-generation lentiviral packaging systems . Our Lenti-X Packaging single shots utilize a packaging system that consists of five separate components (Panel A), mixed in proprietary proportions for optimized packaging activity. The separation of the gag, pol, and env genes effectively reduces the incidence of RCL (Wu et al., 2000). High levels of expression of essential viral components are driven by the Tet-Off and Tat transactivators, which induce a cascade of expression that results in high titers of lentivirus. The pol gene is fused to vpr to ensure transport of the reverse transcriptase/integrase protein into the recombinant lentiviral particle. Not all vector elements are shown. Other 3rd generation lentiviral packaging systems (Panel B) generate lower titers, do not contain separate gag and pol sequences, and do not use a transactivation cascade mechanism.

Back

631275: Lenti-X Packaging Single Shots (VSV-G)

Back

632180: Lenti-X 293T Cell Line

Back

Clontech's lentiviral packaging system (Panel A) and a lentiviral packaging system from a leading competitor (Panel B) were each used to generate viral supernatants from their respective lentiviral system vectors that were engineered to express the ZsGreen1 fluorescent protein

Back

Transduction of neural progenitor cells by Lenti-X lentivirus

Transduction of neural progenitor cells by Lenti-X lentivirus. Recombinant lentivirus for expressing ZsGreen1 was produced using Lenti-X virus and used to transduce normal human neural progenitor cells. A single transduced cell is shown under phase contrast microscopy (Panel A) and fluorescence microscopy (Panel B).

Back

High-titer lentivirus production

High-titer lentivirus production. Lenti-X 293T cells were transduced with the indicated volumes (µl) of lentiviral packaging supernatant generated with the Lenti-X Expression System and then selected with puromycin for 9 days to allow the formation of the resistant colonies, which were then stained with crystal violet.

Back

293T cell line for higher titers

293T cell line for higher titers. We used our fourth-generation lentiviral packaging system and one of our pLVX-lentiviral vectors to compare the virus production of the Lenti-X 293T Cell Line to that of two other commonly used HEK 293-based cell lines. Lenti-X 293T cells clearly outperformed the other cell lines—producing over 6X more virus than 293FT cells and up to 30X more virus than the parental HEK 293 cell line.

Back

The Lenti-X Packaging Single Shots (VSV-G) protocol

Back

Consistent, high-efficiency transfections lead to high titers

Consistent, high-efficiency transfections lead to high titers. A lentiviral vector containing the ZsGreen1 gene was packaged according to the Lenti-X single shots protocol in four independent experiments. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots; the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. 48 hours after transfection, the cells were imaged by fluorescence microscopy (Panel A, top) and light microscopy (Panel A, bottom). After images were taken, the supernatant was harvested and used infect HT1080 cells for titer determination (Panel B, IFU/ml).

Back

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots

High-titer virus was produced regardless of the lentiviral vector backbone with Lenti-X packaging single shots. A CMV ZsGreen1 expression cassette was cloned into several lentiviral vector backbones. These vectors were then packaged into lentivirus using the Lenti-X packaging single shots following the provided protocol. Briefly, 7 µg of pLVX-ZsGreen1 plasmid was added to each of four Lenti-X single shots, and the tubes were vortexed for 20 sec and incubated at room temperature for 10 min. Then, the mixture was added to cultured Lenti-X 293T cells that were approximately 80% confluent. After 48 hours, titer was determined using several methods. To determine infectivity, the supernatant was harvested and used to infect HT1080 cells (Flow Cytometry). Harvested viral supernatants were also analyzed by RT-PCR to quantify viral genome copies (qRT-PCR, Lenti-X qRT-PCR Titration Kit), ELISA to measure p24 (p24 ELISA, Lenti-X p24 Rapid Titer Kit), and by a rapid lentiviral detection method (Lenti-X GoStix).

Back

A comparison of fourth- and third-generation lentiviral packaging systems

A comparison of fourth- and third-generation lentiviral packaging systems . Our Lenti-X Packaging single shots utilize a packaging system that consists of five separate components (Panel A), mixed in proprietary proportions for optimized packaging activity. The separation of the gag, pol, and env genes effectively reduces the incidence of RCL (Wu et al., 2000). High levels of expression of essential viral components are driven by the Tet-Off and Tat transactivators, which induce a cascade of expression that results in high titers of lentivirus. The pol gene is fused to vpr to ensure transport of the reverse transcriptase/integrase protein into the recombinant lentiviral particle. Not all vector elements are shown. Other 3rd generation lentiviral packaging systems (Panel B) generate lower titers, do not contain separate gag and pol sequences, and do not use a transactivation cascade mechanism.

Back

631275: Lenti-X Packaging Single Shots (VSV-G)

Back

Rapid lentivirus concentration

Back

Lentiviral concentration with high yield

Back

Concentrate lentivirus from any volume or from any lentiviral titer

Concentrate lentivirus from any volume or from any lentiviral titer. Lentiviral supernatant was diluted into 250 ml and then concentrated down to 2.5 ml using Lenti-X Concentrator (Panel A). 10-fold serial dilutions of a high-titer lentiviral supernatant (high, medium, and low) were concentrated from a volume of 10 ml down to 100 µl using the Lenti-X Concentrator Reagent (Panel B). Titrations were performed using HT1080 cells and flow cytometry 48 hr post-transduction.

Back

631232: Lenti-X Concentrator